Mini Hydrophores

MINI HYDROPHORE BIATECH SHM2-60

Mini hydrofornia SHM2-60 is a hydrophore set equipped with a horizontal, multi-stage, electric centrifugal pump with an axial thread suction opening and a radial thread discharge opening, and what distinguishes our product from the competition is the automatic pressure regulator controlling the operation of the set.

Design

The automatic water pressure regulator equipped with a built-in pressure transmitter and a controller with a display gives us possibilities such as reading the current mains water pressure, reading and changing the set pressure and reading error codes in case of failure. Changing the pressure setting is limited to selecting the appropriate value using the + and - buttons on the panel below the display. The unit has a built-in non-return valve and dry-running protection.

Application

The pump is suitable for clean water without solid or abrasive contaminants on the internal parts of the unit. On all models SHM stainless steel approved for use in drinking water installations was used.

The set consists of :

  • a stainless steel horizontal multistage pump;
  • an automatic water pressure regulator equipped with a built-in pressure transmitter and a controller with a display showing the current mains pressure and the set pressure;
  • 50l diaphragm tank,
  • flexible hose,
  • stainless steel tee

Technical specifications of the kit

Pump:
- Max capacity (l/min): 33
- Max capacity (m3/h): 2m³/h
- Lifting height (m):43
- Suction capacity (m):
- Motor power (W):750
- Motor power (kW): 0.75
- Power supply (V):230
- Spigot size (inches):1×1

Reservoir:
- Diaphragm tank: 50L
- Tank type: diaphragm
- Tank orientation: vertical
- Max pressure (Bar): 10

Automatic pressure regulator ISP BIATECH DSK-18L
- Power supply: 230V 50/60Hz
- Maximum pump power: 2.2 kW
- Maximum rated current: 16 A
- Maximum pressure: 10 bar
- Water temperature: 0 - 60°C
- Dry-running pump protection: Yes
- Degree of protection: IP54
- Display: Digital
- Autoreset: Yes
- Power cable with plug: Yes - 1.0 m
- Cable to pump: Yes - 0.5 m

en_GBEnglish